17
HE 3362T2
6 CONNECTION
Connect the external display to the input (3).
Connect the 75 ohm antenna cable to the antenna input (5).
Connect the HDMI output (1) of the HE 3362T2 to the TV via an HDMI cable.
Connect the cable with USB socket to the USB socket of the supplied 100-240V~ / 5V
1A power supply,
connect the other part, with Micro USB socket, to the socket 5V
(4) on the device. Connect the supplied
100-240V~ / 5V
1A power supply to an electrical outlet; the display will show “On” and then “Strt”.
To facilitate the installation of the HE 3362T2, it is possible to use double-adhesives (not supplied) to
fix the device to the rear cabinet of the TV and the external display to the front cabinet of the TV.
7 REMOTE CONTROL
7.1 BATTERIES INSTALLATION
Attention: batteries not included
Open the battery compartment cover;
Insert 2x AAA batteries with correct polarization (+/-);
Close the battery compartment cover.
Notes:
-
Do not mix the batteries.
-
Remove the batteries if the remote control is not going to be used for
an extended period of time.
-
Do not place the remote control under the direct sunlight or near
sources of excessive heat.
-
Point the remote control to the unit no more than 8 meters from the
remote control sensor and within 30° horizontally and 30° vertically of
the front of the unit.
BATTERIES INSTALLATION
1. Open the battery compartment cover.
2. lnsert 2xAAA batteries with corree! polarization
(+/-).
3. Close the battery compartment cover.
Notes:
Do not mix the batteries.
Remove the batteries if the remote contrai is
noi going lo be used far an extended period of
time.
Do noi piace the remote contrai under the direct
sunlighl or near sources of excessive heal.
Point the remote contrai lo the unii no more than 8 meters from the remote
contrai sensor and within 30
°
horizontally and 30
°
vertically of the front of the
unii.
CONNECTION
TV
HDMI cable
A ntenna
�
\
]
ANTIN
HD-OUT
SCART
DC-12V
ENGLISH
