T-Fit 220 PLUS
24
English
3. Why can’t you take a hot bath with the smart bracelet?
Bath water temperature is relatively high, there is a lot of vapor in
the gas phase, with small molecular radius and it can easily infiltrate
into the smart bracelet from the shell gap; when the temperature
drops down, it will condensate into liquid droplets, which will easily
cause short circuit inside the smart bracelet, damage the circuit
board, and then damage the smart bracelet.
Note: for more common questions, please, refer to “Da Fit” APP
feedback.
Warnings:
Please consult your doctor before you take part in a new sport.
The smart bracelet should not be used for medical purpose though it
may monitor the heart rate in the real-time and dynamic way.
Warnings
This device is an electronic instrument of high precision; therefore,
avoid using it in the following cases:
• Close to strong heat sources such as heaters and stoves.
• In environments that are too cold or too hot or very dusty.
• The appliance must not be exposed to dripping or splashing
water. No liquid-filled objects, such as vases, must be placed on
the appliance.
• If liquids penetrate into the device, bring the device to the
nearest authorized TREVI service Centre.
• Do not use the device near flammable or explosive gases, this
may cause a malfunction of the device or a fire hazard.
• No naked flame sources, such as lighted candles, must be placed
on the appliance.
• Keep the device out of reach of children. The device is not a
2 > You have to confirm that message can be displayed normally in
the mobile phone notification bar. The message push on the smart
bracelet is completed by reading the message from the mobile phone
notification bar; the smart bracelet will not receive the push if there
is no message in the mobile phone notification bar. (You need to
find notification settings in the mobile phone settings, and turn on
the notification switch of WeChat, QQ, phone, SMS and mobile
phone client)
3> You have to open the auxiliary function settings of the APP client.
3. Why can't you take a hot bath with the smart bracelet?
Answer: Bath water temperature is relatively high, there is a lot of
vapor in the gas phase, with small molecular radius, and it can easily
infiltrate into the smart bracelet from the shell gap; when the
temperature drops down, it will condensate into liquid droplets,
which will easily cause short circuit inside the smart bracelet,
damage the circuit board, and then damage the smart bracelet.
Note: For more common questions, please refer to PubuFit APP
feedback.
Warning:
Please consult your doctor before you take part in a new sport.
The smart bracelet should not be used for medical purpose though
it may monitor the heart rate in the real-time and dynamic way.
10