TEM-1800
7298
“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel,fax:+48 58 56 300 80
8
recommended to verify it by a practical test.
Maintenance cleaning and storage
WARNING! DANGER OF INJURY!
Switch the device off and pull the plug out of the mains socket before
carrying out any work on the device.
Correct maintenance for the machine can prolong the working life; The
handle switch must always keep in proper function and good maintenance;
The mixing tools should be cleaned when the poeration is finish or no use
for long time; Use a cloth to clean the device.
Normally the fllowing water or quaz sand can clean the mixing tools well. Do
not under any circumstances use petrol or strong solvents. Do not allow any
liquids to enter the device.
DO not fore any mechaincal stress in the machine, such as POUND, because
it will be unavoidable damaged;
The mixing shaft must always be antipollution; The threaded hole must
always be put protecting cover;
The vent of motor housing can not be covered when the machine is in
operation, there can not be any flammable materials in the machine;The
vent must be often cleaned;
Store the device & accessories in a dry room
where out of the reach of
children also.
Only original parts can used in this machine.
The carbon brush must be checked and maintenance when the machine
operation up to 60hours, please change the brush in time if find the brush
worn out. Loosen carbon brush cap first, Pull out and replace the carbon
brush (Always replace the two brushes at the same time), screw carbon
brush caps.
Service centre
WARNING! Have your device repaired only by qualified specialist personnel using
original manufacturer parts only. This will ensure that your device remains safe to
use.
