Spartan-3E FPGA Industrial Micromodule
User Manual
Right click the “Boundary Scan” to initial-
ize the chain and select “Initialize Chain”.
An “Assign New Configuration File” dialog
window should pop up automatically. You
can now select the file corresponding to
your design. In the following example, we
will show how to select the micromodule
reference design “blinking.bit” in the
“TE0300” folder. Do not forget to select
the “Enable Programming of SPI Flash
Device Attached to this FPGA” option in the
same window.
An “Add PROM File” dialog window should
pop up automatically. You can now select
the file corresponding to your design. In
the following example, we will show how
to select the micromodule reference design
“blinking.mcs” in the “TE0300” folder.
Select now the SPI Flash corresponding to
the one present on the module (STMicro-
electronics M25P32 in the example, a 32
Mbit (4M x 8) Serial Flash memory).
Trenz Electronic GmbH
22
