TMM4500 Reference Guide
D
EPLOYING THE
TMM4500
–
S
ETTING
U
P
T
HE
D
ISPLAY
H
EAD
M
ODULE
S
TOP
The information and illustrations below will enable you to properly set-up the display head module stop.
This step is important because the module stop ensures a stable display reading experience in typical
application environments.
Display Front Face Hardware Overview
1.
Thumb Screws
The four (4) thumb screws are used to
secure the assembly into the component
rack.
2.
Quarter-Turn Latches/Receptacles
These quarter-turn fasteners are used to
secure the front face to the display
drawer.
3.
Display Module Lock Down Latches
The lockdown latches are used to secure
the modules when stowed for transit.
4.
Rubber Bumpers
The rubber bumpers are used as stops
and prevent the display module head
from moving once the screens are
deployed.
UNLOCK
3.
Unlock display head
assembly lock downs
FOLD
2.
Fold front face as shown
SECURE
1.
Secure front face into the
display drawer using the
quarter-turn latches
The multi-head display of the TMM4500 is now ready for deployment.
4-3
Trenton Systems, Inc.
