TMM4500 Reference Guide
NOTE:
The arm may need to be adjusted to the next set of mounting holes to fit correctly.
E)
Slide the rack mount unit straight into the rack (if following the TIP you can wrest it on the screws
you previously installed in the front) and secure the rear arms into the “L” brackets with the provided 10-32
Panhead screws.
F)
With the remaining 10-32 screws, secure the unit into the Rack Frame. (Removing the 2x 10-32
screws you were using as stops in the TIP and install them into the remaining hold of the rack ears). Ensure
the unit is level and then tighten all of the 10-32 screws.
G)
Your equipment should now be mounted in the rack.
NOTE:
This is a general install guide. Actual rack mount install may vary from unit to unit. For
additional assistance please contact
Trenton Systems technical support
.
Trenton Systems, Inc.
3-2
