THS2085 Installation Guide
Trenton Systems, Inc.
3-4
15.
CAUTION – Ensure that when mounting the completed rail and frame assemblies to the 19” rack
that the left and right assemblies are the same distance from the top or bottom of the rack. Failure
to align the slide rails properly will result in the computer not being level inside the rack. If the
slides are grossly misaligned then you may not be able to slide the chassis into the slide rails.
16.
Refer to figure 5 and slide the chassis into the rails attached to the frame of the rackmount
enclosure. (You should have another person help you lift and slide the chassis into the enclosure.)
17.
You should hear and audible “click” when the rail stop hooks on the slide engage with the chassis
stops inside the rails mounted to the enclosure supports.
18.
Push up on the rail stop hooks and push the chassis completely into the enclosure.
19.
Each Trenton System chassis has two through holes on each chassis-mounting flange. Use these
holes to secure your chassis to the enclosure. (Note: The hardware used in this step is highly
dependent on your enclosure type; therefore, Trenton does not provide the hardware for this step.)
20.
Contact Trenton Systems if you require additional assistance.
Figure 5 – Chassis Installat
ion
