manualshive.com logo in svg

TRENDnet TVP-221H, System Integrator'S User Manual, Page: 41 / 59

Share
Download
TRENDnet TVP-221H System Integrator'S User Manual Download Page 41

 

 

 

3.2  CLI Commands in Download Mode 

Under download mode, the CLI supports the following commands: 

Command Description 
help 

Display help screen 

quit 

Terminate download mode, switch to normal operation mode. 

net set  

Change IP parameter 

start 

Start downloading code from TFTP server 

 

The following section describes each of the commands. 

 

41

 

help 

The 

help

 command lists the top-level commands. 

Syntax Description 

This command has no arguments or keywords 

 

42

 

quit 

The 

quit

 command is used to terminate the download mode and return to 

normal operation mode. 

Syntax Description 

This command has no arguments or keywords 

Note 

Switching mode from Telnet session will terminate current active session. 
You’ll need to connect to TVP-224HR again to be able to access the CLI. 

43

 

net set lan ip addr 

Use the 

lan set ip

 command to assign a lan IP address to the TVP-224HR. 

Syntax description 

addr 

The IP address of the TVP-224HR. 

Note 

The new IP address will not take effect until the TVP-224HR is reset. 

 

Summary of Contents for TVP-221H




























































Reviews:

No comments