26
set h323 allow_call_wo_gk {true|false}
The
set h323 allow_call_wo_gk
command is used to inform the H.323 stack
to allow incoming calls from a remote TVP-224HR which is not registered
with a gatekeeper.
Syntax Description
true
Allow calls from TVP-224HR that is not
registered with a gatekeeper.
false
Do not allow calls from TVP-224HR that is
not registered with a gatekeeper.
Default
The TVP-224HR allows calls from TVP-224HR that is not registered with a
gatekeeper.
27
set h323 display_name display_name
The
set h323 display_name
command is used to set the display name
information that is carried in the H.323 setup messages.
Syntax Description
display_name
The string to be is inserted into the
Q.931 display information field and in
the sourceAddress field 2 of the H.323
setup-UUIE .
Example
The following example sets the h323 display name as “customer”.
Console> set h323 display_name customer
28
set h323 dtmf_duration duration
When sending DTMF, by default, the gateway will use H323 Version II
standard DTMF signal except other specified (ex: IMTC_dtmf). User may
specify the duration of the DTMF tone.
Syntax Description
duration
Duration for the DTMF tone in millisecond.
Default
The default setting is 300 milliseconds.
29
set h323 endpoint_reg_type {
gw | terminal}
The
set h323 endpoint_reg_type
command is used to set the H.323
registration type. This should not be confused with the H.245 terminal type,
although the two parameters should be programmed consistently. This