15
net set lan mask <mask>
Use the
net set lan mask
command to set the IP subnet mask for the TVP-
224HR Lan side.
Syntax description
ip_mask
The subnet mask of your network.
Note:
The new setting will not take effect until the TVP-224HR is reset.
16
net set lan speed <10 | 10f | 100 | 100f | 10/100 | 10/100f>
The TVP-224HR Lan side allows you set the link speed for its Ethernet
interface. Use the
net set lan speed
command to set the Ethernet link speed.
Syntax description
10
Fixed the Ethernet speed at 10 Mbps
100
Fixed the Ethernet speed at 100 Mbps
auto
Enable the 10/100 Mbps auto-negotiation capability.
17
net set http {on|off}
The TVP-224HR allows you enable of disable its built-in HTTP server. Use
the
net set http
command to enable or disable the HTTP server.
Syntax description
on
Enable HTTP server. This allows users to
access the TVP-224HR from web
browser.
off
Disable HTTP server.
18
net set manager password <new_password> <new_password>
Use the
net set manager password
command to change the password for
Telnet user.
Syntax description
password
The new password. The password must be
equal to or less than 7 alphanumeric characters.
It must be identically typed twice for the TVP-
224HR to be certain about the new password.
19
net show wan
The
net show
wan
command displays all the wan network settings.