Network Commands
7
net reset
Use the
net reset
command to reset the TVP-224HR. The CLI will prompt
you to confirm the command before resetting the TVP-224HR.
Syntax Description
This command has no arguments or keywords
8
net set wan ip ip_addr
Use the
net set wan ip
command to assign an Static IP address to the TVP-
224HR Wan side.
Syntax description
ip_addr
The IP address of the TVP-224HR.
Note
The new IP address will not take effect until the TVP-224HR is reset.
9
net set wan mask ip_mask
Use the
net set wan mask
command to set the IP subnet mask for the TVP-
224HR Wan side.
Syntax description
ip_mask
The subnet mask of your network.
Note:
The new setting will not take effect until the TVP-224HR is reset.
10
net set wan gateway ip_addr
Use the
net set wan gateway
command to assign a default gateway (router)
for the TVP-224HR Wan side. The default gateway routes packet data outside
or your IP subnet.
Syntax description
ip_addr
The IP address of the default gateway. IP
address of 0.0.0.0 stands for no default
gateway.
Note:
The new setting will not take effect until the TVP-224HR is reset.