TRENDnet TV-IP662WI, User Manual

Page: 63 / 73

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
61
Modulation Type
Operating Frequency
2400 ~ 2483.5MHz ISM band
Channel Numbers
11 channels for United States
13 channels for Europe Countries
Data Rate
From MCS0 to MCS7
MCS GI-400ns / 20MHz
0 7.2
1 14.4
2 21.7
3 28.9
4 43.3
5 57.8
6 65.0
7 72.2
Media Access
Protocol
CSMA/CA with ACK
Transmitter Output
Power

Typical RF Output Power (tol-2dB) at each RF chain, Data
Rate and at room Temp. 25degree C

HT20

14.5dBm at MCS0~MCS7
Receiver Sensitivity

Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =10%

HT20
–88dBm at MCS0
–84dBm at MCS1
–81dBm at MCS2
–78dBm at MCS3
–74dBm at MCS4
–72dBm at MCS5
–70dBm at MCS6
–67dBm at MCS7
Antenna
Specification

Antenna

Dipole Antenna
Gain

2 dBi (max.)
Operating Frequency

2.4~2.5Ghz

Firmware Specification
OS Linux 2.6
Live Video (IE)

Video Profile : Profile1, Profile2 Profile3 and Profile4

Manually Snapshot, Manually Recording, Set Storage Folder

Listen/Stop Listening, Talk/ Stop Talking

Language selection: English, German, Spanish, Russian, and French

IR_LED On/Off (When “Day/Night Mode setting” is “Manual IR” mode)

Digital Zoom in /Zoom out control

Indicator
1.
Motion Trigger Indicator
2. Recording Indicator
Live Video (Non-IE)

Video Profile : Profile1, Profile2 Profile3 and Profile4

Manually Snapshot, Manually Recording, Set Storage Folder

Listen/Stop Listening, Talk/ Stop Talking

Language selection: English, German, Spanish, Russian, and French

IR_LED On/Off (When “Day/Night Mode setting” is “Manual IR” mode)

Digital Zoom in /Zoom out control

Indicator
1.
Motion Trigger Indicator
2. Recording Indicator
Digital Zoom 4
X
Setup wizard This wizard will guide you through a step-by-step process to configure
your new IP Camera and connect the camera to the internet.
Network setting

LAN Settings
1.
Automatic IP Address
2. Static IP Address (Default IP:192.168.10.30)
3. PPPoE :Enable/Disable

User Name

Password

Confirm password

Port Settings
1.
HTTP Port(default is 80)
2. RTSP Port(default is 554)

UPnP