© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662WI
2
Product Hardware Features
Rear Panel View
1.
Micro SD Slot
– Insert a micro SD card into this slot to store video/image data.
2.
Power Port
– Connect the included power adapter from your camera to an
available power outlet.
Note
: Use only the adapter that came with your camera.
3.
Line Out
– Insert an external microphone to this connection.
4.
Rear Air Vent
– This is to cool the camera.
5.
WPS (Wi-Fi Protected Setup)
–
Push and hold this button for 3 seconds to
activate WPS.
6.
WPS LED
– The WPS LED will blink green when WPS is activated.
7.
Reset Button
–
Use an item such as a paperclip to push and hold this button for
3 seconds and release to reset your camera to its factory defaults.
8.
Antenna
– 2dBi detachable antenna.
9.
LAN Port
– Connect Ethernet cables to your wired network devices.
Front Panel View
1.
IR LED
– Built-in 6 IR LED for night vision uses. (for TV-IP862IC)
2.
Power/Link LED
– This LED indicator is solid blue when your camera is powered
on. If this LED indicator is off, there is no power to your camera. This LED
indicator is blinking green when there is connection/data to your camera.
3.
Microphone
– Built-in microphone for audio can be turn on or off.
4.
Light Sensor
– Detects the light source to turn IR on or off.
5.
Camera Lens
– The camera lens.
6.
Focus Ring
– Turn to adjust the focus of the camera.
Summary of Contents for TV-IP662WI
Page 1: ...Cover Page ...
Page 73: ......
