TV-IP311PI User’s Guide
Network Settings
© Copyright 2014 TRENDnet. All rights reserved.
35
802�1X
Setup 802.1X for remote authentication service.
802.1X Authentication
Enable IEEE
802�1X:
Check this box to enable 802.1X authentication
service�
EAPOL version: Extensible Authentication Protocol (EAP) over LAN
(EAPoL)� Choose version 1 or 2� This version number
much match to your 802�1X service EAPOL version�
User Name: Enter the account name�
Password: Enter the password�
Confirm:
Enter the password again�
Click Save to save the changes�
IP Address Filter
Set up a list of clients allow only the clients on the list to access this
camera or to reject clients on the list from access this camera.
Enable IP
Address Filter:
Check this box to enable IP address filtering
service�
IP Address
Filter Type:
Choose Forbidden to ban the listed IP addresses or
Allowed to allow listed host to access this camera.
Add: Click Add to add a user account
Modify: To modify an entry on the list, highlight the entry
by clicking on it. Then, click the Modify button.
Enter the IP address then click OK�
Delete: To delete an entry on the list, highlight the entry by
clicking on it. Then, click Delete�
Clear: To clear all entries, click Clear�
Click Save to save the changes�
