TRENDnet TFM-560E, User Manual

Page: 49 / 54

- 46 -
&V View active file and stored phone numbers
&W Store active configuration into the modem’s
NVRAM
&Zn=x Store telephone number
n=0 to 3
x=<string> see also the dial modifier
in ”ATDn” command
The max. number of digits per string is 40.
* Manufacturer default
Extended “AT\” (Back Slash) Command Set
Command Options Function & Description
\Jn Constant DTE speed option
\J0 * DCE and DTE rates are independent
\J1 Force the DTE interface speed to the DCE
connection rate (line speed) after on-line
\Nn Error control mode options
\N0 Buffered mode, no error control (flow
control is allowed).
\N1 Direct mode, no error control (no flow
control is allowed).
\N2 MNP reliable mode. If MNP 2-4 error
control establishment fails, the modem
disconnects.
\N3 * V.42, MNP or buffer mode. The modem
attempts to connect in V.42 mode. If this
fails, the modem attempts to connect in
MNP mode. If this fails, the modem
connects in buffer mode.
\N4 V.42 or disconnect. The modem attempts
to connect in V.42 mode. If this fails, the
call will be disconnected.
\Qn Local flow control options
\Q0 Disable flow control (same as “AT&K0”)
\Q1 XON/XOFF software flow control (same
as “AT&K4”)
\Q3 * RTS/CTS hardware flow control (same as
“AT&K3”)
\Tn Set inactive timer (for buffer mode only)
n=0 * Disable inactive timer
n=1 - 255 Enable inactive timer. Length in minutes
\Vn Protocol result codes
\V0 Disable protocol result code appended to
DCE speed
\V1 * Enable protocol result code appended to