© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TFC‐1600MM
10
SNMP Configuration
Get Community Name:
to get the device community name (default = public).
Set Community Name:
to set the device community name (default = private).
Trap Community Name:
to authorize the device trap community name (default = public).
Trap Host IP Address:
to set the trap host IP address (same as monitoring station IP address).
Cold Start trap:
to set the trap for rebooting the device (default = disable).
Warm Start trap:
to set the trap when the device had been reset (default = disable).
Authentication Fail Trap:
to set the warning trap when the community name of the device and workstation are different (default = disable).
Power Fail Trap:
to set the Power Fail Trap (default = enable).
Fan Fail Trap:
to set the Fan fail trap (default = enable).
MC Plugin Trap:
to set the trap when a Media Converter Module has been plugged in (default = enable).
MC Pullout Trap:
to set the trap when the Media Converter Module has been pulled out (default = enable).
MC Broken trap:
to set the trap when the Media Converter Module was broken (default = enable).
MC Link up trap:
to set the trap when a linking is connected (default = enable).
MC Link down trap:
to set the trap when a linking is disconnected (default = enable).
MC Active Slot Xchg trap:
to set the trap when there is a redundant function activated (default = enable).
MC Active Slot Lose trap:
to set the trap when the redundant function is fail (default = enable).
Summary of Contents for TFC-1600MM
Page 1: ...TRENDnet User s Guide Cover Page ...
Page 30: ......
