TRENDnet TFC-1600MM, User Manual

Page: 19 / 30

© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TFC‐1600MM
15
SNMP Configuration commands:
config snmp get_communityname: to configure the “get” community name (default = public).
config snmp set_communityname: to configure the “set” community name (default = private).
config snmp trap_communityname: to configure the “trap” community name (default = public) for authorize the device trap.
config snmp trap_hostip: to set the trap host IP address (same as monitoring station IP address).
config snmp coldstart_trap: to set the trap for rebooting the device (default = disable).
config snmp warmstart_trap: to set the trap when the device had been reset (default = disable).
config snmp authfail_trap: to set the warning trap when the community name of the device and workstation are different (default = disable).
config snmp powerfail_trap: to set the Power Fail Trap (default = enable).
config snmp fanfail_trap {enable | disable}: to set the fan fail trap (default = enable).
config snmp mcplugin_trap {enable | disable}: to set the trap when a Media Converter module has been plugged in (default = enable).
config snmp mcpullout_trap {enable | disable}: to set the trap when the Media Converter module has been pulled out (default = enable).
config snmp mclinkup_trap {enable | disable}: to set the trap when a linking is connected (default = enable).
config snmp mclinkdown_trap {enable | disable}: to set the trap when a linking is disconnected (default = enable).
config snmp mcbroken_trap {enable | disable}: to set the trap when the Media Converter module was broken (default = enable).
config snmp mcactiveslotXCHG_trap {enable | disable}: to set the trap when there is a redundant function activated (default = enable).
config snmp mcactiveslotLOSE_trap {enable | disable}: to set the trap when the redundant function is fail (default = enable).