9. After creating an NDPS Manager, you can create NDPS printers by using NetWare
Administrator, as explained below.
Creating an NDPS Printer Agent
To create Public Access Printers using the NDPS Manager Object in NetWare Administrator,
follow this procedure:
1. Start the NDPS Manager object you will be using to control the Printer Agent.
2. At
the
Identification
page, click the
Printer Agent List.
3. Click
New
to see the
Create Printer Agent
window, as shown below.
Figure 47: Create Printer Agent
4. Enter the desired name for the
Printer Agent (PA) Name.
5. Normally,
the
NDPS Manager
will be the NDPS Manger object you are using.
6. Select
Novell Printer Gateway
in the
Gateway Type.
(see figure2 above)
7. Click
OK
and then select the available printer.
8. Select
Remote (LPR on IP)
in the
Connection Type
.
9. Click
Next
to see the following
Configure Port Handler
screen.
Figure 48 Configure Port Handler
10. In the
Host address IP
field, enter the IP Address previously assigned to the Print Server
device.
11. In the
Printer Name
field, enter the Logical Port name on the Print Server. (L1 for Parallel
Port, L2 for USB Port).
Page 75
Summary of Contents for TEW-P1U1P
Page 1: ......