manualshive.com logo in svg

TRENDnet TEW-P1U1P, User Manual, Page: 31 / 80

Share
Download
TRENDnet TEW-P1U1P User Manual Download Page 31

 

Device List 

The left panel displays a list of all Wireless Print Servers found on the network. When a 
Wireless Print Server is selected from the list, its details are displayed in the right panel. 

Note

: If the IP address is "Null", please click the 

Refresh

 icon to get the value again. 

If the desired Wireless Print Server is not listed, try the following: 

• 

Check that the device is installed and ON, then 

Refresh

 the list. 

• 

If the Wireless Print Server is on another LAN segment, use the 

InitDevice - Attached 

Remote

 menu option to locate and display the Wireless Print Server. 

Icons 

 

Device Status 

Menu equivalent: 

Main - Device Status

 

All of the settings for the current device are displayed in a read-only scrollable list 
in the left panel. 

You can use the "Save to File" and "Restore to Device" buttons on this screen to 
save a copy of the selected device's CONFIG file to your PC, or restore a 
previously saved file to the selected Wireless Print Server.  

 

 

 

Printer Status 

Menu equivalent: 

Main - Printer Status

 

After selecting this icon, a 

Detail

 button will be available to show more 

information about the printer. 

Page 27 

Summary of Contents for TEW-P1U1P

















































































Reviews:

No comments