manualshive.com logo in svg

TRENDnet TEW-P1U1P, User Manual, Page: 58 / 80

Share
Download
TRENDnet TEW-P1U1P User Manual Download Page 58

 

User Software 

The software provided for remote users (InterNet Printing Port) should be installed by 
everyone intending to use Internet printing. Otherwise, remote users can print correctly only if: 

• 

They send an E

-

Mail directly to the Wireless Print Server Mail Account, using their 

normal E

-

Mail application. 

• 

The E

-

Mail contains plain text only. 

• 

The Internet Wireless Print Server is configured with 

Print every E

-

Mail

 ON. 

Installation of the InterNet Printing Port software will create a new printer port. After attaching 
the correct printer to this port, users can print to the Internet Printer using any Windows 
application.  

Installation - User Software 

1.  Run the InterNet Printing Port installation program SETUP.EXE 

2.  Default values for the installation are: 

• 

Directory - 

C:\Program Files\Internet_Printer  

• 

Start Menu

 folder - 

InterNet Printing Port Driver 

3.  You will then see the 

Configure Port

 screen, as shown in the following screenshot. 

 

Figure 41: InterNet Printer Port  

Page 54 

Summary of Contents for TEW-P1U1P

















































































Reviews:

No comments