© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-829DRU
81
Secure Socket Layer VPN (SSL) / OpenVPN
Network > VPN > OpenVPN
SSL VPN Server Setup
1. Log into your router management page (see “
Access your router management page
”
on page 8).
2. Click on Administrator and click Certificate Management.
3. Enter a name for the certificate to use for SSL VPN and click Add. (e.g. SSL-VPN)
4. Click the Used for drop-down list and select OpenVPN.
5. In the Country Code field, enter the two letter country code. (e.g. US)
6. In the State or Province Name field, enter the full name of the state or province. (e.g.
California)
7. In the Local Name field, enter the city name. (e.g. Torrance)
8. In the Organization Name field, enter your company name (e.g. TRENDnet)
9. In the Org. Unit field, enter the section, group, or department. (e.g. IT)
10. In the Email Address field, enter the email address used for the certificate. (e.g.
tew-
)
11. In the Validity Days field, enter the number of days the certificate will be valid and
click Apply to save and commit the changes.. (e.g. 100)
12. Click on Network, click VPN, and click the OpenVPN tab.
13. Check the Enable option to enable the SSL VPN server.
Note: You may receive a notification if Dynamic DNS is not configured on your router. If
you are using VPN, it is not required however, strongly recommended to setup the
Dynamic DNS feature on your router to prevent any issues with VPN connectivity if
your public (WAN) Internet IP address dynamically changes.