TRENDnet User’s Guide
TEW-820AP
Create schedules
Tools > Schedule
For additional security control, your router allows you to create schedules to specify a
time period when a feature on your access point should be activated and deactivated.
1. Log into your access point management page (see “
page” on page 8).
2. Click on
Main
, and click on
Time
.
3. Review the Schedule settings. Click
Apply
to save settings.
•
Name:
Enter a name for the schedule you would like to apply.
•
Days:
Check the days you would like the rule to be applied or select
All Week
to
enable the rule all week.
•
Time format:
Select from the pull down menu the time format to use.
•
Start/End Time:
Select the start and end time you would like the schedule to follow.
Note:
The schedule defined will define the time/day the feature will be activated.
Access Point Maintenance & Monitoring
Reset your Access Point to factory defaults
Tools > Settings Management
You may want to reset your access point to factory defaults if you are encountering
difficulties with your access point and have attempted all other troubleshooting. Before
you reset your access point to defaults, if possible, you should backup your access point
configuration first, see “
Backup and restore your access point configuration settings”
page 35.
There are two methods that can be used to reset your access point to factory defaults.
•
Reset Button
– Located on the rear panel of your access point, see “
” on page 2. Use this method if you are encountering
difficulties with accessing your access point management page.
OR
•
Access Point Management Page
1. Log into your access point management page (see “
page” on page 8).
2. Click on
Tools
and click on
Settings Management
.
3. Under Restore
Factory Default Settings
section, click
Restore Default
. When
prompted to confirm this action, click
OK
.
© Copyright 2014 TRENDnet. All Rights Reserved.
34
Summary of Contents for TEW-820AP
Page 1: ...TRENDnet User s Guide Cover Page...
Page 51: ......