E
S
P
A
N
O
L
3. Hardware Installation
Waterproof kit installation
1. Unscrew the sealing nut from the main
body.
2. Separate the rubber seal from the claw.
3. Verify that you have the following parts:
Cable Gland, Seal, Claw, Sealing Nut
f O S
I
Cable Gland
Seal
Claw
Sealing Nut
4. Insert one end of an Ethernet cable into
the sealing nut.
5. Insert the Ethernet cable into the seal.
6. Insert the seal into the claw.
7. Insert the seal/rubber claw into the Cable
Gland.
8. Connect the Ethernet cable to the PoE port
on the rear of the access point.
9. Using your hand, screw the main body
counter clockwise to secure it to the
TEW-739APBO.
10. Using your hand, screw the seal nut
counter clockwise to secure it to the main
body.
&
9
