© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-652BRU
32
3. Next to
PPTP, L2TP, or IPsec
(depending the VPN protocol your corporation requires)
click
Enabled
or
Disabled
to turn the VPN pass through feature on or off on your router.
Note:
It is recommended to leave these settings enabled.
4. To save changes, click
Apply
.
Allow/deny multicast streaming
Management > Remote Management
In some cases, applications require multicast communication (also called IP multicast
which is the delivery of information to a specific group of computers or devices in a
single transmission) typically used in media streaming applications. Multicast streaming
is enabled by default on your router to allow applications that require multicast
communication through your router which typically does not require and additional
configuration changes.
1. Log into your router management page (see “Access your router management page”
on
page 26
).
2. Click on
Management
, and click on
Remote Management
.
3. Next to
Multicast Stream
, click
Enabled
or
Disabled
to turn the feature on or off on
your router.
Note:
It is recommended to leave this setting enabled.
4. To save changes, click
Apply
.
Identify your network on the Internet
Main > Dynamic DNS
If you want to remotely access computers or devices on your network attached to your
router, you will need to be able to identify your network on the Internet. The DDNS
(Dynamic DNS) feature allows you to identify your network on the Internet even if your
Internet IP address changes as the DDNS service providers allow you to create a domain
name you can use to easily identify your network on the Internet.
Note:
First, you will need to sign up for one of the DDNS service providers listed in the
Server Address
drop-down list
.
1. Sign up for one of the DDNS available service providers list under
Server Address
. (e.g
.
dyndns.com, no-ip.com
, etc.)
2. Log into your router management page (see “Access your router management page”
on
page 26
).
3. Click on
Main
and click on
Dynamic DNS
.
4. Next to DDNS, click
Enabled.
5. In the
Server Address
drop-down list, select the provider you selected, and enter your
information in the fields.
6. To save changes, click
Apply
.
Summary of Contents for TEW-652BRU
Page 1: ...TRENDnet User s Guide Cover Page...
Page 70: ......
