TRENDnet TEG-S80ES User Manual Download Page 63

 

 

 

 

 

 

 

 

 

 

© Copyright 2018 TRENDnet. All Rights Reserved. 

 

 

 

 
TRENDnet User’s Guide

 

Limited Warranty 

60

 

Limited Warranty 

TRENDnet warrants only to the original purchaser of this product from a TRENDnet 

authorized reseller or distributor that this product will be free from defects in material 

and workmanship under normal use and service. This limited warranty is non-

transferable and does not apply to any purchaser who bought the product from a 

reseller or distributor not authorized by TRENDnet, including but not limited to 

purchases from Internet auction sites. 

 

Limited Warranty 

TRENDnet warrants its products against defects in material and workmanship, under 

normal use and service. Specific warranty periods are listed on each of the respective 

product pages on the TRENDnet website.  

 

AC/DC Power Adapter, Cooling Fan, and Power Supply carry a one-year 

warranty. 

Limited Lifetime Warranty 

TRENDnet offers a limited lifetime warranty for all of its metal-enclosed network 
switches that have been purchased in the United States/Canada on or after 1/1/2015. 

 

 

Cooling fan and internal power supply carry a one-year warranty 

 

To obtain an RMA, the ORIGINAL PURCHASER must show Proof of Purchase and return 
the unit to the address provided. The customer is responsible for any shipping-related 
costs that may occur. Replacement goods will be shipped back to the customer at 
TRENDnet’s expense. 

 

Upon receiving the RMA unit, TRENDnet may repair the unit using refurbished parts. In 
the event that the RMA unit needs to be replaced, TRENDnet may replace it with a 
refurbished product of the same or comparable model. 

 

In the event that, after evaluation, TRENDnet cannot replace the defective product or 
there is no comparable model available, we will refund the depreciated value of the 
product. 

 

If a product does not operate as warranted during the applicable warranty period, 

TRENDnet shall reserve the right, at its expense, to repair or replace the defective 

product or part and deliver an equivalent product or part to the customer. The 

repair/replacement unit's warranty continues from the original date of purchase. All 

products that are replaced become the property of TRENDnet. Replacement products 

may be new or reconditioned. TRENDnet does not issue refunds or credit. Please 

contact the point-of-purchase for their return policies. 

 

TRENDnet shall not be responsible for any software, firmware, information, or memory 

data of customer contained in, stored on, or integrated with any products returned to 

TRENDnet pursuant to any warranty. 

 

There are no user serviceable parts inside the product. Do not remove or attempt to 

service the product by any unauthorized service center. This warranty is voided if (i) the 

product has been modified or repaired by any unauthorized service center, (ii) the 

product was subject to accident, abuse, or improper use, or (iii) the product was subject 

to conditions more severe than those specified in the manual. 

 

Warranty service may be obtained by contacting TRENDnet within the applicable 

warranty period and providing a copy of the dated proof of the purchase. Upon proper 

submission of required documentation, a Return Material Authorization (RMA) number 

will be issued. An RMA number is required in order to initiate warranty service support 

for all TRENDnet products. Products that are sent to TRENDnet for RMA service must 

have the RMA number marked on the outside of return packages and sent to TRENDnet 

prepaid, insured and packaged appropriately for safe shipment. International customers 

Summary of Contents for TEG-S80ES


































































Reviews: