TRENDnet TEG-S80ES, User Manual, Page: 36 / 65

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-S80ES
33
Management VLAN – Select the VLAN ID from any user created VLANs for the
management VLAN and additionally displays the VLAN Name.
Note: By default, the default VLAN VID 1 is set as the Management VLAN.
In this list, you can click Modify to modify an entry or click Delete or delete the entry. If
the entries span multiple pages, you can navigate page number in the Page field and
click Go or you can click First, Previous, Next, and Last Page to navigate the pages.
Note: The default VLAN VID1 cannot be removed.
NOTE: The configured settings are only applied to the switch’s temporary memory and
will be lost upon the next power-cycle. Please follow these next steps to save the
configurations to the switch’s NV-RAM to ensure the settings will remain throughout
power-cycles and reboots:
1. From the menu on the left: click on Save, then click the blue button Save
Settings to Flash.
2. Click Continue to return to the Web Configuration of your switch.
Configure VLAN Port Settings
Network > VLAN > Port
In this section, you can modify the port VID value.
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on Bridge, click on VLAN, and click on Port Settings.
3. Review the settings for each port. Click Apply to save settings.

PVID – Enter the port VLAN ID. Modifying the value in the All row will apply the
same value for all ports. Note: Required for untagged VLAN ports.