© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-S80ES
30
1.
From the menu on the left: click on Save, then click the blue button Save
Settings to Flash.
2.
Click Continue to return to the Web Configuration of your switch.
Set Ingress Rate Limiting
Network > Bandwidth Control > Ingress Rate Limiting
This section allows you to set the ingress (receive) rate for each switch port.
1. Log into your switch management page (see “
Access your switch management page
”
on page 7).
2. Click on Network, click on Bandwidth Control, and click on Ingress Rate Limiting.
3. Review the settings for each port. Click Apply to save the settings.
Bandwidth – Select the bandwidth limit in bits per second from the dropdown
menu.
NOTE: The configured settings are only applied to the switch’s temporary memory and
will be lost upon the next power-cycle. Please follow these next steps to save the
configurations to the switch’s NV-RAM to ensure the settings will remain throughout
power-cycles and reboots:
1.
From the menu on the left: click on Save, then click the blue button Save
Settings to Flash.
2.
Click Continue to return to the Web Configuration of your switch.
Summary of Contents for TEG-S80ES
Page 1: ...TRENDnet User s Guide Cover Page...
Page 65: ......