TRENDnet TEG-7080ES, User Manual, Page: 18 / 35

© Copyright 2018 TRENDnet. All Rights Reserved.
16
TRENDnet User’s Guide
TEG-7080ES
Configure Storm Control
Bridge > Bandwidth Control > Storm Control
This section allows you to configure the storm control settings for the switch.
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on Bridge , click on Bandwidth Control, and click on Storm Control .
3. Review the settings for each port. Click Apply to save the settings.
•
Storm Control Type – Enabling this feature provides bidirectional bandwidth
control. Once enabled, any excessive packets will be discarded.
•
Storm Control Rate – This parameter defines the Ingress/Egress Storm Control
Rates ( 1/2/4/8/16/64/128/256/512Mbps)
4. Click Apply to save configuration changes to the NV-RAM to ensure that if the switch
is rebooted or power cycled, the configuration changes will still be applied.
Set Ingress / Egress Rate Limiting
Bridge > Bandwidth Control > Rate Limiting
This section allows you to set the ingress (receive) and egress (transmit) rate for each
switch port.
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on Bridge , click on Bandwidth Control, and click on Rate Limiting .
3. Review the settings for each port. Click Apply to save the settings.
•
Port – Lists the switch ports. Users can click on the port number to change Rate
Limiting changes to the respective port.
•
Ingress Rate – Displays the Ingress Rate Limit value.
•
Egress Rate - Displays the Egress Rate Limit Value.
4. Click Apply to save configuration changes to the NV-RAM to ensure that if the switch
is rebooted or power cycled, the configuration changes will still be applied.