© Copyright 2018 TRENDnet. All Rights Reserved.
9
TRENDnet User’s Guide
TEG-7080ES
Set your IPv4 settings
System > IPv4 Setup
This section allows you to change your switch IPv4 address settings. Typically, the IP
address settings should be changed to match your existing network subnet in order to
access the switch management page on your network.
Default Switch IPv4 Address: 192.168.10.200
Default Switch IPv4 Subnet Mask: 255.255.255.0
1. Log into your switch
management page (see “
Access your switch management page
on page 7).
2. Click on
System
, and click on
IPv4 Setup
.
3. Review the settings. When you have completed making changes, click
Apply
to save
the settings.
•
System MAC Address:
Displays the switch MAC address information.
•
System IP Address:
Enter the new switch IP address. (e.g.
192.168.200.200
)
•
System Subnet Mask:
Enter the new switch subnet mask. (e.g.
255.255.255.0
)
•
System Default Gateway:
Enter the default gateway IP address. (e.g.
192.168.200.1 or typically your router/gateway to the Internet).
•
System IP Mode:
Click the drop-down list and select
Static
to manually specify
your IP address settings or
DHCP
to allow your switch to obtain IP address
settings automatically from a DHCP server on your network.
4. Click
Apply
to save configuration changes to the NV-RAM to ensure that if the switch
is rebooted or power cycled, the configuration changes will still be applied.