Print Server Administration User’s Guide
38
Setting up Novell NetWare 3.x Printing
Choose values for the options as follows:
♦
L=
n
Determines which local port will be redirected to the
network print queue.
L=1
corresponds to LPT1,
L=2
corresponds to LPT2, and
L=3
corresponds to LPT3. By
default, LPT1 is captured.
♦
S=
server
Determines which server the print queue is
located on. By default, your login file server is used.
♦
Q=
queue
Determines which print queue your print jobs are
redirected to.
♦
TI=
n
Sets the timeout for Autoendcap. After your
application starts printing, if it goes for n seconds without
any additional printer output, then NetWare assumes that the
print job is finished and sends it to the printer. If your print
jobs are becoming split up you may need to increase this
setting.
♦
F=
form
Determines which form print jobs will use. Forms
can be defined using PRINTDEF.
♦
B=
bannername
Sets the text that appears on the banner for
the job. By default the banner text is
LST:
. You can disable
the banner entirely using the
NB
option.
You can add the CAPTURE command to your network startup
batch file, or add it to your login script preceded with a
#
symbol.
NetWare Settings
If necessary, you can use the
Queue Service Settings
tab of the
NetWare Configuration dialog window to set several of the print
server’s parameters.
Summary of Contents for TE100-PS3
Page 6: ......
