Combi 65
Strengthening the Joint
If the joint between the worktops is not
supported underneath, after some time the joint
may ‘sag’ and become misaligned; to reduce this
the joint should be reinforced with a loose
tongue or biscuit dowels. The biscuit jointing
cutter set Trend Ref. 342, C152 or TR35 can be
used with a portable router. The size of biscuit
used should be No. 20.
Ref. BSC/20/100 (100 biscuits)
Ref. BSC/20/1000 (1000 biscuits)
A 650mm worktop should have at least 5
biscuits.
Sealing the Joint
The cut edges of the joint should be coated with
a water-resistant adhesive, or sealant before
assembly, to prevent moisture seeping into the
core of the worktops, which would swell, and
disfigure the worktop
Cutter Ref. 342 shown
No.20
PVA
SEALANT
Waterproof
R
trend
-11-
Biscuit
Underside View
Guarantee
n
The jig carries a manufacturers guarantee in
accordance with the conditions on the
enclosed guarantee registration card.
Recycling
n
Jig, accessories and packaging should be
sorted for environmentally friendly recycling.
