Combi 65
Recommended Cutters
A 12.7mm (
1
/
2
”) diameter cutter must be used,
which has a 50mm cutting reach and plunge cut
facility.
Router must be plunged in stages of maximum
8mm in one pass.
-4-
Description
Order Ref.
Craft Range Cutter
C153x1/2TC
As above with TC centre tip
C153Dx1/2TC
Trade Range Cutter
TR17x1/2TC
As above with TC centre tip
TR17Dx1/2TC
Professional Range Cutter
3/83x1/2TC
As above with TC centre tip
3/83Dx1/2TC
As per 3/83 but with shorter shank
for Makita, Ryobi & Hitachi routers
3/83Mx1/2TC
Replaceable tip cutter
RT/11x1/2TC*
Above cutter (with shorter shank)
for Makita, Ryobi & Hitachi routers
RT/11Mx1/2TC*
Replacement blade (1 off)
RB/A
Replacement blade (10 off)
RB/A/10
*This cutter has a 30mm tip length but will cut to a
maximum depth of 50mm.
Order Ref. C153, TR17D, TR17, 3/83D, 3/83M
Order Ref. RT/11, RT/11M
Sub-base Sets
To obtain a perfect accurate close fitting joint, a
30mm guide bush must be used. The guide
bush must always be fitted concentric with the
cutter. This can be achieved using Trend sub-
bases and 30mm outside diameter guide bush
ref. GB30.
Trend sub-bases have a central recess to allow
fitting of the Trend guide bush to most makes of
routers and are available ready to fit the most
popular makes.
Two types are offered GB/5 and UNIBASE.
All sub-bases contain screws, a line up bush and
two line up pins. The line up pins and bush
ensure exact alignment of sub-base with router
r o u t i n g t e c h n o l o g y
R
trend
GB/5 SUB-BASE
Fits following Router Models
Description
Order Ref.
Elu MOF31,77,98,131,177(E),
Bosch GOF1600A & 1700ACE
DeWalt DW625EK
Felisatti R346EC
GB/5
Makita 3612BR & 3600B
Ryobi RE600N & R600N, RE601
GB/5/A
Hitachi M12V, M12SA & TR12
GB/5/D
Makita 3612C & 3612
GB/5/J
Bosch 1300ACE
GB/5/K
Freud FT2000E
AEG OFSE2000
Casals FT2000VCE
GB/5/L
Flex OFT3121VV,
Portercable 7539, 7519
GB/5/M
Felisatti TP246(E)
Festo OF2000E, Mafell L065E,
Metabo OF1612 & OFE1812,
Ryobi R500 & R502, Skil 1875U1,
Wadkin R500
GB/5/S*
*Please state model when ordering.
GB/5 Set comprises the following
Sub-base
GB10
170mm Ø x 8mm
1
/
2
” shank
line up pin
1
/
4
” shank
line up pin
tr
e
n
d
10
mm
R
ACCESSORIES
