Standard Operating Procedure
Attraction: EUROBUNGY-TRAMPOLINE
August
2011
Policy: Standard Operating Procedures Manual
Approved: Peter Raidt
Page 12 of 39
create an unsafe situation. Be sure to store the elastics in a cool dry place. Should the elastics
get wet, dry them completely before using them again. Make sure that all carabiners are in
closed position and tightly secured before each use. Never use less than 2 elastics per side of
the harness. Do not allow the elastics to become entangled. LOOPS made out of Latex should be
stored in a bag or box with Talcum or treated with Silicon Spray to extend the lifespan as much
as possible.
CHANGE IN CONFIGURATION
In April 2005 we did a change in the configuration of harness, carabiner, elastics, swivels and
jumper rope.
So far the configuration was as following:
Harness – carabiner – elastics – carabiner – swivel – jumper rope
Now we recommend the following
Harness – swivel – carabiner – elastics – carabiner – jumper rope
Why do we do so ?
We found out that most of our customer let the elastics which they do not use, hanging onto the
top carabiner where you connect it to swivel & the jumper rope.
But with these elastics hanging there, the swivel does not swivel and all the elastics get tangled
up !
Therefore we designed a new swivel which you can hook in directly into the harness and since
we have the new wide range harnesses, there is not tangling of elastics anymore and the
operators is saving valuable time during the operation !
WEIGHT RANGE TABLE
The following table shows how many elastic loops should be utilized per side of the harness with
the various weights:
There are two different diameters. Thin & thick. Never put less than two elastics at each sid of
the hips.
