Threat Protection System Hardware Specification and Installation Guide
29
All ports on the TPS device are dynamic and do not require fixed cable assignments. When making your
network cable connections, keep track of which ports you select for which purpose.
1. Attach one or more network cables for the internal network. Make note of which front panel ports you
use.
2. Attach a network cable for the external (WAN) network. Make note of which front panel port you use.
3. Using the LSM or the command line interface, configure network interface types appropriate to the
surrounding network using the ports you selected.
For more information about device network configuration and connections, refer to the
Local Security
Manager User Guide
and the
CLI Reference
.
Check LEDs
When you connect power to the device, the system completes a series of component checks. It then displays
LEDs to show the status of each component. Refer to
Chassis features
on page 9 for more information about
the LEDs.
Run the setup wizard
After you have powered on, the setup wizard is displayed on your COM port terminal. The wizard prompts
you to perform basic configuration tasks and periodically input information. After you run the setup, you
can further configure your system using subsequent setup commands through the Command Line Interface
(CLI). See the
CLI Reference
for detailed command descriptions.
