Threat Protection System Hardware Specification and Installation Guide
25
Rack-mounting the TPS 2200T device
The TPS 2200T devices are 2U devices that you can install using a front mount or mid-mount in a two-post
rack, or front and rear mount in a four-post rack.
Two-post rack mount for 2U chassis
Describes how to mount a 2U TPS device in a two-post rack.
You can choose to install your chassis into a two-post rack using a front mount or a mid-mount.
1. Align the two front rack-mounting brackets (shown in
Figure 13
on page 25) to the chassis holes
according to your front mount or mid-mount requirements.
2. Secure the brackets to the chassis using the flat-head screws (three on each side) that came with the kit.
Figure 13. 2200T model front-mount bracket and ear
