Trend Micro™ Network VirusWall™ Enforcer 1500i (CR100 Series) Installation and Deployment Guide
2-12
Installing the Device
To use Network VirusWall Enforcer:
•
Mounted to a standard 19-inch four-post rack cabinet
The device requires 1 rack unit (RU) of vertical space in the rack.
Tip:
If mounting more than one device, position and mount the devices in close
proximity. Doing so allows you to easily maintain the devices.
•
On any stable surface as a freestanding device
For freestanding installation, ensure that the device has at least 2in (5.08 cm) of
clearance on each side to allow for adequate airflow and cooling.
WARNING!
Ensure that the fan vent is not blocked.
Installing the device involves performing the following tasks.
WARNING!
Before performing the following tasks, review the safety instructions in
the Product Information Guide that came with the device.
Onboard NIC
Two RJ-45 10/100/1000 Mbps Ethernet
Network adapter
(expansion slot)
Silicom™ PEG2BPi-SD-RoHS (Dual Port Copper
Gigabit Ethernet PCI Express Bypass Server
Adapter)
Power supply
345W
T
ABLE
2-4.
Technical specifications (Continued)
S
PECIFICATION
D
ETAILS
