Trend Micro™ Network VirusWall™ Enforcer 1500i (CR100 Series) Installation and Deployment Guide
4-2
Before Preconfiguration
Complete the following tasks before you preconfigure Network VirusWall Enforcer:
•
Test the failopen functionality. Network traffic should still pass through the device
after a hardware or system error or if the device loses power.
•
Determine the password for the
admin
account.
Tip:
There are two default accounts:
Admin
and
PowerUser
. These accounts use
admin
and
poweruser
, respectively, as their default passwords.
•
Determine the host name for the device.
Verifying Network Support
In a failopen deployment, the total length of the network cable connecting regular ports
to other devices must not exceed 100 meters (~328 feet).
A cable longer than the maximum length will prevent failopen from working. See
on page 3-18 for more information.
Preparing for Preconfiguration
To prepare for preconfiguration, check if you have completed the instructions in
on page 4-2 before starting with the succeeding steps.
