Trend Micro™ Network VirusWall™ Enforcer 1500i (CR100 Series) Installation and Deployment Guide
4-10
5.
Type
3
to select
Return to Main menu
. The
Main Menu
displays.
6.
Select
Save and Log Off
to make changes take effect.
Note:
In order to apply the configuration changes made in the Preconfiguration console,
you must save and log off.
Connecting to the Network
Make sure you preconfigure the device before attempting to connect the device to the
network. After preconfiguration, switch off the device before connecting it to the
network.
To connect the device to your network:
1.
Connect one end of the cable to a regular port and the other to a segment of your
network.
2.
Power on the device.
Note:
Network VirusWall Enforcer can handle various interface speed and duplex mode
network traffic. See
Setting the Interface Speed and Duplex Mode
Configuring Network VirusWall Enforcer
After preconfiguring Network VirusWall Enforcer, you can configure the device and
start protecting your network.
Trend Micro recommends performing the following tasks after preconfiguring a device:
•
Change the password for the default accounts
•
Activate the device
•
Update components
•
Configure policy enforcement
For more information, refer to the
Online Help
and the
Administrator’s Guide
. See
