Instructions for Use and Maintenance 2452H (1402)
trejonindustries.se
7
7
Breddningsving
en monteras
på insidan av
maskinen
1 Introduction
1.1 Foreword
Thank you for choosing this OPTIMAL machine. We have concentrated our efforts in order to
develop a sturdy machine that will operate trouble-free for many years. The working life of the
machine, however, depends not only on us but also on you. We have compiled this instruction
manual in order to facilitate the use of the implement and describe proper maintenance
procedures. Read these instructions carefully. Contact the retailer from whom you purchased
the machine whenever you want to order repair parts or need any other assistance. When you
are ordering repair parts, make sure that you know the right model, type and serial number. See
the identification plate on the chassis.
1.2 Description
The equipment is designed to clear snow from level ground such as roads and parking lots. The
snow blower is to be mounted
on the tractor’s loader or a similar attachment frame. The
machine is designed to be driven by tractors existing hydraulic system, assumed that it can
deliver the right flow. Oil flow and working pressure at tractors hydraulic system is the factors
that decide which effect the hydraulic motor will deliver. TREJON deliver snow blower with a
hydraulic motor that will suit the figures about tractors hydraulic system given at order of new
machine.
The snow blower works best if it is mounted on a tractor that supplies recommended oil flow
regardless speed of vehicle. Therefore tractors with hydrostatic transmission, is especially
suited for work with hydraulic driven snow blowers.
For operation of the hydraulic motor of the snow blower, the tractor need following hydraulic
connections:
A hydraulic outlet that can deliver recommended flow to the snow blower.
A hydraulic outlet with open (pressure less) oil return directly to the tracto
r’s oil tank.
A hydraulic outlet with open (pressure less) case drain oil return (max. 3,6 Bars back
pressure) directly to the tractor’s oil tank.
Remaining functions needs:
A double acting hydraulic outlet is needed for turning of ejector tube.
If the machine is equipped with hydraulic flap regulator, one more double acting outlet is
needed.
1.3 Working stages
The equipment works in three stages:
1. Break-up and feeding in with self-cleaning feed screws with cutting action.
2. Transport to the ejecting rotor.
3. The ejecting rotor will powerfully throw out the snow through the ejector tube. The
ejector tube is adjustable as to the direction and the distance of the thrown snow.