background image

X-MAXX • 19

Now it’s time to have some fun! This section contains instructions on 
driving and making adjustments to your model. Before you go on, 
here are some important precautions to keep in mind. 

Where to drive

X-Maxx is a large vehicle capable of high speed and requires a large 
area to run. Choose a location where the X-Maxx will not have an 
opportunity to collide with onlookers or interfere with pedestrian or 
vehicular traffic. Before running, also confirm that there are no local 
ordinances or posted signs that prevent running radio controlled 
vehicles (such as schools and parks). X-Maxx is powerful and can 
create ruts and damage to groomed or preserved landscapes. Be 
considerate of others by avoiding areas where X-Maxx could cause 
damage. 

Mixed driving across different surface types is recommended. If 
you are running frequently in tall grass, deep sand, or other high 
load conditions, you may overheat the motor or the speed control. 
This will result in reduced power output until the system cools. We 
recommend allowing time for the power system to cool between 
battery packs. 

•  Allow the model to cool for a few minutes between runs. This is 

particularly important when using high-capacity battery packs 
that allow extended periods of running. Monitoring temperatures 
will extend the lives of the batteries and motors. See page 26 for 
advanced user information on monitoring temperatures.

•  Do not continue to operate the model with low batteries or you 

could lose control of it. Indications of low battery power include slow 
operation, delayed vehicle response, or ESC shutdown due to the 
Low-Voltage Detection circuitry. Stop immediately at the first sign of 
weak batteries. When the batteries in the transmitter become weak, 
the power light will begin to flash red. Stop immediately and install 
new batteries.

•  Do not drive the model at night, on public streets, or in large crowds 

of people.

•  If the model becomes stuck against an object, do not continue to run 

the motor. Remove the obstruction before continuing. Do not push 
or pull objects with the model.

•  Because the model is controlled by radio, it is subject to radio 

interference from many sources beyond your control. Since radio 

interference can cause momentary losses of control, allow a safety 
margin of space in all directions around the model in order to 
prevent collisions.

•  Use good, common sense whenever you are driving your model. 

Intentionally driving in an abusive and rough manner will only result 
in poor performance and broken parts. Take care of your model so 
that you can enjoy it for a long time to come.

•  High-performance vehicles produce small vibrations that may 

loosen hardware over time.  Frequently check wheel nuts and other 
screws on your vehicle to ensure that all hardware remains properly 
tightened.  

About Run Time

A large factor affecting run time is the type and condition of 
your batteries. The milliamp hour (mAh) rating of the batteries 
determines how large their “fuel tank” is. A 3000mAh battery pack will 
theoretically run twice as long as a 1500mAh sport pack. Because of 
the wide variation in the types of batteries that are available and the 
methods with which they can be charged, it’s impossible to give exact 
run times for the model.

Another major factor that affects run time is how the model is driven. 
Run times may decrease when the model is driven repetitively from a 
stop to top speed and with repetitive hard acceleration.

Tips for Increasing Run Time

• Use batteries with the highest mAh rating you can purchase.
• Use a high-quality peak-detecting charger. 
• Read and follow all maintenance and care instructions provided by 

the manufacturer of your batteries and charger.

• Keep the VXL-6s cool. Get plenty of airflow across the ESC heat sinks. 
• Lower your gear ratio. Installing a smaller pinion or larger spur gear 

will lower your gear ratio, causing less power draw from the motor 
and battery, and reducing overall operating temperatures.

• Maintain your model. Do not allow dirt or damaged parts to cause 

binding in the drivetrain. Keep the motor clean.

mAh Ratings and Power Output

The mAh rating of the battery can affect your top-speed performance. 
The higher capacity battery packs experience less voltage drop under 
heavy load than low mAh rated packs. The higher voltage potential 
allows increased speed until the battery begins to become discharged.

9

DRIVING YOUR MODEL

Summary of Contents for XMaxx 77076-4



































Reviews: