38 • TRAXXAS TRX-4
ACCESSORY
Option Part
8140 Lift Kit
8140X Lift Kit
SUSPENSION LINK BAG
DRIVELINE BAG
G7. Attach ball cups to differential locking cables
G8. Assemble front and rear driveshafts
G. SUSPENSION & DRIVELINE INSTALLATION
2.6x8mm BCS (2)
Axle Ball Cup (2)
2.6x8mm
BCS
2.6x8mm
BCS
Axle Ball Cup
Differential
Cable
1
2
4
3
3x6mm BCS (4)
CV Cross Pin (4)
Stock Pin (4)
CV Cup (4)
CV Ball (4)
CV Pin Retainer (4)
Short Female
Half Shafts (3)
Long Female
Half Shaft
Male Half Shafts (2)
3x6mm
BCS
3x6mm
BCS
Short half shaft assembly
Long half shaft assembly
x3
x1
CV Ball
CV Ball
CV Cross Pin
CV Cross Pin
Long Female
Half Shaft
Short Female
Half Shaft
CV Pin
Retainer
CV Pin
Retainer
CV Pin
Retainer
CV Pin
Retainer
CV Cup
CV Cup
CV Cup
CV Cup
Male Half
Shaft
Male Half
Shaft
Stock
Pin
Stock
Pin
Stock
Pin
Stock
Pin
Front driveshaft
Rear driveshaft
Ensure stock pins
are installed parallel
to each other.
Screw ball cup on until all threads are hidden
Ensure stock pins
are installed parallel
to each other.
Short Half
Shaft Assembly
Short Half
Shaft Assembly
Short Half
Shaft Assembly
Long Half Shaft
Assembly
It is okay to slightly rock
horn to align ball cup.
Do not turn servo shaft
by hand or you could
damage the servo.
SAFE
NO!
NO!
TRX-4 Assembly Manual.indd 38
12/28/17 5:33 PM
