30 • TRAXXAS TRX-4
ELECTRONICS BAG
ELECTRONICS BAG
F6. Install T-Lock servos onto chassis
F8. Install antenna from receiver on right floor pan
F. ELECTRONICS INSTALLATION
3x8mm BCS (6)
3x4mm GS
2065 Servo (2)
Antenna Cap
Chassis T-Lock Servo Mount
Antenna Tube
Receiver Box Foam Seal
3x8mm
BCS
3x8mm
BCS
Chassis T-Lock Servo Mount
1
3
2
3x8mm
BCS
Route wires
from the ESC
and the shift servo
through the top
loop of the T-Lock
servo mount before
installing the mount
on the chassis.
4
F7. Install receiver bottom foam
3x4mm GS
Antenna Tube
Antenna Cap
1
2
Note servo arm orientation. Ball cup mounts should be
on the same side as the top loop of servo mount.
Note wire routing
TRX-4 Assembly Manual.indd 30
12/28/17 5:32 PM
