Gas/Pellet Remote Thermostat
SKU 99300689
Page 8 of 8
9/10/12 - 17601682
© Travis Industries, Inc.
CHILD PROOF FEATURE:
The child proof switch disables the buttons on the front of the remote. Thermostat and timer functions continue
to operate.
6 Hour Safety Timer (Factory Default is “ON”)
The receiver has a switch on the back that activates the 6 hour safety timer switch.
Enable – Timer Set to “ON”
In case of transmitter failure (malfunction / battery run out) or out of transmission range, the receiver will shut
down the heater automatically after 6 hours of no transmitter signal detection.
Disable – Timer Set to “OFF”
The receiver and heater will continue to operate in the last setting and will not shut off automatically even in case
of transmitter failure. This is not recommended.
OPERATION WITH DEAD BATTERIES
The heater may be operated with dead batteries. Use the button on the receiver to toggle the heater on and off.
TURNING THE UNIT OFF WHEN TRANSMITTER IS NOT PRESENT
If at any time you misplace the transmitter and wish to turn the heater off, press the button on top of the receiver.
This will over-ride the transmitter and shut the heater off.
NOTE
: If the remote is within transmission range, it may turn the heater back on. To insure the heater does not
turn on, shut off gas to the heater or unplug the remote to turn the heater off.
OPERATION DURING POWER OUTAGES
If a power outage occurs, the receiver will turn the heater off. Once power is restored, the remote will turn the
heater on (if the remote calls for heat) within 30 minutes. If you wish to over-ride the remote and turn the heater
on (gas stoves only), turn the on/off switch on the gas heater to "ON".
