74
SECTION 11
STORAGE & MAINTENANCE
Grease spots and stubborn dirt can be
cleaned off with an all-purpose spray cleaner.
Harsh cleaners and organic solvents can
attack the printed vinyl; they are not
recommended.
C
ABINETRY
& T
ABLES
To keep hardwood doors, cabinet fronts and
hardwood tables looking like new regularly
dust with a soft cloth dampened with a
cleaning polish or mild detergent solution.
Avoid using ammonia based products or
silicone oils as they may cause damage if
used over a long period of time. The finish is
durable and resistant to most household
spills. However, spills should be wiped up
promptly to
avoid
potential problems.
Excessive prolonged exposure to direct
sunlight, high temperatures and high humidity
can cause damage to both the finish and the
wood itself. These should be avoided.
C
OUNTERTOPS
Glass rings, food spills, water spots and
smudges usually wipe off with a damp
sponge.
Granicote Table and
C
ountertops
(If so equipped)
:
Travel Lite creates custom fiberglass molds to
provide unique and functional surface areas for
your camper. Please contact Travel Lite directly
if you have queries on this product.
cleaning agent in an inconspicuous area for
colorfastness.
Carpet (if so equipped)
Vacuum regularly with a vacuum cleaner with
a revolving brush or beater bar. Be sure the
vacuum does not have teeth, combs or rough
edges as they may damage the carpet. It is
important to remove loose soil and debris
while it is on the surface. Heavily traveled
areas (i.e., walkways, areas in front of the
furniture) may be protected with small throw
rugs to prolong the life of the carpet. Some
spills contain chemicals that will destroy
carpet fibers and dyes. If you have doubts
about what caused the spot, contact a
professional carpet cleaner.
Because of the additional dirt typically
associated with camping, we recommend that
you vacuum the carpet frequently. Have
tough and deep stains professionally steam
cleaned. Use spot removers for minor spills.
Always test the carpet for color fastness in an
inconspicuous area before using any
product..
Vinyl flooring (if so equipped)
Periodically vacuum or sweep to remove dirt
and gritty particles. Although most common
spills will not permanently stain the vinyl
floors, they are usually easier to remove if
wiped up before they set. Simply blot with a
paper towel and wipe clean with a damp
cloth. As part of a regular maintenance
program, sponge mop the entire floor. Do not
use dish detergents or vinegar and water
because they will dull your floor.
To care for the vinyl floor covering, use a
damp mop with water and a mild cleaner. DO
NOT SOAK THE FLOORING. Use care to
avoid wetting the carpet edges. To avoid
problems of “yellowing” linoleum, the flooring
OEM recommends avoiding cleaners that
contain oil based solvents (i.e. cleaners
containing lemon oil, Murphy’s Oil Soap, etc.).
R
EPLACING
L
IGHT
B
ULBS
Before replacing a bulb, be sure the light is
off. Do not touch the glass part of the new
bulb with your bare fingers. The skin oil left on
the glass will evaporate when the bulb gets
70
To prevent permanent damage
‰
Always use hot pads or trivets under hot
pans,
dishes,
or
heat
producing
appliances such as frying pans.
‰
Always use a cutting board; never use a
knife on the countertop.
‰
Avoid harsh chemicals such as drain
cleaners, oven cleaners, etc.
‰
Do not let cleaners with bleach
.
F
LOORING
Remember to wear rubber gloves to protect
your hands when cleaning. Always test a
