61
SECTION 9
SLIDEOUT SYSTEMS
the 9 volt battery connected to the motor
brake crank the nut on the motor until the
room is sealed. Once the slide is in a closed
position remove the 9 volt battery and
harness.
M-Tec slideout override
In the event of a power failure or low battery,
the slide-out room may be operated manually
with a 5/8” ratchet wrench (not supplied). The
manual crank shaft is located on the motor-
transmission housing. Turn
the
crank
clockwise to move the room “in”, counter-
clockwise to move the room “out”.
Reico Titan slideout override
In the event of a power failure, the slide-out room
may be operated manually by turning the
manual crank hex showed in the diagram below.
58
