CHAPTER 3. TRASSIR IP CAMERA CONFIGURATION
Press
Reset
to reset current detections settings.
Press
Clear
to remove the current area.
3.3.6.6 «Schedule Record» tab
Open the
Schedule Record
tab.
The data recording is set up in the upper block.
Setting
Description
Pre-record
The time period from
0
to
3
s before the event triggering (see 3.3.6.1), during
which the video will be recording.
Delay record
The time period from
0 s
to
3
s after the alarm triggering (see section 3.3.6.1)
within which the video will be recorded.
Stream
The video stream that will be recorded to the archive:
Main stream
or
Sub stream
.
SD card cycle record
Set the flag to overwrite the built-in archive in case of the overflow. In this case,
older files will be overwritten by the new ones.
Record package
The recorded file minimum size:
3min
,
5min
or
10min
.
Select recording to the built-in storage schedule in the lower area(see section 3.3.5.1):
7*24 hours Record
– the recording will be performed permanently;
Schedule Record
– the video stream will be recorded according to the customized
schedule;
Disable
– this option will be disabled.
NOTE.
If the
SD card record
flag is set in the event settings (see section 3.3.6.1), the recording will
be performed regardless of the schedule settings.
User manual for TRASSIR IP cameras
119
Summary of Contents for TR-D4D2
