TRASSIR TR-D4D2, User Manual

Page: 115 / 151

CHAPTER 3. TRASSIR IP CAMERA CONFIGURATION
3.3.6.2 “Motion detector” tab
NOTE.
Before starting the setup, make sure that the camera is installed correctly for the proper
operation of the video analytics module. Check Supplement E. IP Camera placement or
camera installation recommendations.
Open the Motion Detection tab to set up motion detector.
The Detector Zone Settings window lets you select the zones of the shooting area where a
reaction will be triggered when motion appears.
NOTE.
You can create up to 4 motion detection zones.
Left click on the image and specify the zone in which the the motion will be detected.
The
Sensitivity parameter lets you configure the detector's sensitivity in all specified zones.
The higher the sensitivity value is, the more sensitive is the motion detector.
Press
Clear to reset all motion detection settings.
Press Save to save the changes.
User manual for TRASSIR IP cameras 115