TRANWO Technology 20t, Manual

Page: 28 / 36

If you are not getting any signal at all
!
Check the power on the camera and monitor
!
Make sure power plugs are pushed all the way in
!
Check the CHANNEL switches on both camera and monitor are set to the same
number
!
If the camera/monitor is powered by batteries, replace all batteries with new
ones
!
If you can receive sound, but don't have images, or the images are poor, check
the SCREEN ON/OFF button on the front panel, or adjust the V-HOLD/
CONTRAST/BRIGHTNESS knob on the rear of the monitor
If the signal is poor, or there is interference
!
Adjust antenna orientation
!
Change the channel settings on both camera and monitor and make them the
same
!
If there is a microwave oven in use in the path between the camera and monitor,
remove the microwave oven or turn it off
Troubleshooting
28