TRANWO Technology 20t, Manual

Page: 25 / 36

Note 1: The monitor will auto detect the receiving channels and display them in
sequence. When only one channel dipswitch is in the ON position, the
monitor will receive the channel continuously, without regard to the position
of the 5th dipswitch. If more than one dipswitch remains on, the auto-
sequence function will continue on those channels.
Note 2: When none of the dipswitches are in the ON position, the monitor will
automatically set the receiving channel to Channel 1.
Auto-Sequence Function for Multiple Location Monitoring
Example:
Using the auto-sequence function:
If you have two wireless cameras (GigaAir 30T) and their channels
are set to CHANNEL 1 and CHANNEL 3, and you wish to
monitor the two channels in sequence, you must slide up the first
and third dipswitches to the ON position (see the diagram on the
right). If you wish these two channels to be alternated at eight-
second intervals, slide the DIP 5 switch to the ON position.
or four-second channel change
intervals.
Leave it in the lower position f
1 2 3 4 5
ON
DIP
Stopping the auto-sequence function:
To stop the auto-sequence function and lock on one channel, leave the dipswitch for the
channel you want to receive in the ON position.
Slide the others to the lower position.
25
3