16
11-2. 19” Rack 1 x S5 Series Receiver with Front Mount Antenna
The rack mounting kit is supplied as standard with S5.5 systems.
Step 1.
Unscrew 3 x lid retaining screws (M3x6) from the front left side of the chassis (viewed from the front)
and fit the small angled rack bracket, using the supplied screws. There are 3 of these supplied with
each receiver.
Step 2.
Unscrew 3 x lid retaining screws (M3x6) from the front right side of the chassis and fit the supplied long
angled bracket using the screws supplied.
Step 3.
Fit the 2 supplied antenna extension cables into the front panel long bracket and tighten their BNC nuts.
Screw the BNC plugs of each into the antenna sockets on the rear of the receiver. Should front mount
antennae not be required, fit the 2 plastic blanking plugs supplied into the spare holes.
